admin – Members

Building an El Camino model

admin — Thu, 31 Oct 2024 20:25:32 +0000

This is a model build I have been working on for the last few days in between posting and writing and other life stuff.

The Chevelle model I mentioned above that I built last month.

Oct 29, 2024 #elcamino #3dmodeling #OFX

The last couple of days I have been working on an El Camino. I like to follow bidding sites for Salvage cars and I also follow Classic car sites. Since I started on the Chevelle I realized how much I liked the body style. I drove taxi at one time and owned two Chevy Malibu/Chevell’s. I also owned a 72 malibu as well. I found a flood damaged 72 El Camino on one site I follow and another 72 that had been mounted on a Blazer (I checked the measurements; it could not have been mounted on a stock Blazer as the wheelbase would not even have been close. A full-size GM Pickup would have been a better bet or an S10 which would have been near perfect. In any case it had to be a lot of work.) frame. Hmm, guess this one will be on a blazer frame (I have since added a modified S10 4×4 frame). Having fun building it! #elcamino #3dmodeling #OFX #DellSweet #RadSandbox

The S10 frame sectioned and modified with full-size GM Leaf Spring axels front and rear…

I am having fun with it and it will be available both as a low-slung car and a high rider 4×4 when I finish. I am currently working on custom bumpers for the 4×4 version.

Home: https://www.pcgeos.com

NFS-01 Track and Land

admin — Wed, 23 Oct 2024 15:45:30 +0000

Oct 22, 2024 #radsandbox #3dbuild #3dmodeling A quick build I did for this track in Open FX. Open FX does have a spline tool, so it is easy to build your road, sides and even Landscape and then just build your track. After the build I split the files into separate files and that way I can map them as I choose too. #radsandbox #3dbuild #3dmodeling #3dgamebuilds #OpenFX #radsandbox #gaming

Get the model: Landscape NFS-01 – Pcgeos

NFS 01

Landscape NFS-01

Home: https://www.pcgeos.com

New Dirt Track 01

admin — Thu, 17 Oct 2024 21:04:46 +0000

This is a dirt track I built over the last few months and finally finished. It is hand built, not modular or BTB. I built it to test out some fade pieces of road texture. Once started I wanted to finish it, but I have a habit of never finishing unless I set a goal, so the other day I took it apart and then put together the pieces I wanted. I wound up with three separate landscape/tracks. I load the others soon. I show the finished model and then load it in Rad Sandbox as a RigidBody and drive around to show the work.

#rigidbody #directx #gamemodel #3DRoadBuild #3dlandscapedesign

Home: https://www.pcgeos.com

Chrysler minivan 3D model

admin — Wed, 16 Oct 2024 17:02:39 +0000

#3DModels #ChryslerMiniVan #VanModel The Mini Van I built to be able to build the Mini van pickup build. This is built in OFX and the UV work was done in Ultimate Unwrap. The render was done in Rad Sandbox. 3DModels #ChryslerMiniVan #VanModel #RadSandbox #UltimateUnwrap Wendell Sweet

Like it? Check it out here: Chrysler Mini Van – Pcgeos

Home: https://www.pcgeos.com

Military 4 Pack

admin — Mon, 14 Oct 2024 15:00:26 +0000

Military Pack 4

$2.99

A two set Military model set in the Direct X format. All UV work is done to render as shown. All graphics included.

Category: 3D Models Tags: #3DGame Builder Software, #3DGame Building, #3DModeling, #Car Models

Military Pack 4

https://pcgeos.com/product/military-pack-4/

A new Military model build

admin — Sun, 13 Oct 2024 19:46:56 +0000

I built another military model yesterday and today. I based this somewhat off the work I did on the AMC Gremlin truck. This was enjoyable to build and I added it to Rad Sandbox to take it for a ride. #radsandbox #gamemodel #3dmodels #3ddesign

Home: https://www.pcgeos.com

Model build – Military Concept Part two

admin — Thu, 10 Oct 2024 14:14:43 +0000

#3DModeling #UVWork #3DModelUVWork

This is the second part. There was a small part I didn’t record when I started the UV work yesterday while uploading the first video. All you missed is what I usually do, divide the model in half, tighten up my lines, mirror the model and then align it and weld it. I did that and added a driveline. Then today I began to add the rest of the parts from my parts folder, parts I built for other models and saved and did the UV/Graphic map work. I hope you got something from it, and please pray for Florida they are inundated with Tornados before Milton even makes landfall. A rough situation. #3DModeling #UVWork #3DModelUVWork #GameBuilds #UltimateUnwrap #radsandbox • Full Military truck build part 02

Part 1 – Part 2

Full Military truck build part 02 (youtube.com)

Home: https://www.pcgeos.com

Model build – Military Concept Part one

admin — Thu, 10 Oct 2024 14:08:09 +0000

#3dbuild #3dmodels #3dmodeler

Complete 3D model build. This is the initial building of a military concept vehicle. I ran an AI concept image for an Advertisement I was doing for a book, and it came back with an AI rendered military concept truck that I liked. The entire model is built in this 246 min video. It isn’t an exact copy; I just built a concept of my own from the image. The next video will simply be rendering the completed model, adding wheels/tires etc. from my parts folder. Hope you enjoy the real time video, and you can look forward to the finished video. If you like this sort of content let me know and I will do more. Indecently this entire model was bult in Ultimate unwrap and I will do the UV work there too. So, start to finish. Enjoy, Dell…

#3dbuild #3dmodels #3dmodeler #3dmodeling #3dgamebuilds • Full Military truck build part 01 Wendell Sweet

Part 01 – Part 02

Home: https://www.pcgeos.com

Chrysler Mini Van Pickup truck

admin — Tue, 01 Oct 2024 01:36:35 +0000

A project that came from wondering what a Chrysler mini van would look like turned into a pickup truck. I had to build a Chrysler mini van and unlike most of my projects it had to be to specs so I could see what needed to be done. I wound up building the van in three sections, base which was the rockers and the wheel wells, floor pan. The middle was the door skins to the sills of the windows, and last was the roof windows. that made it easy to cut the roofline at where the truck bed would be using natural default lines. It was fun and I have a ton of leftover build parts to make more projects with. #3dbuild #3dmodeling #directx #OpenFXModeler #radsandbox #gamebuilds This will be a Wastelands model. Abandoned, trashed, sprayed with graffiti and then set on a 4×4 frame and built.

Turning a Chrysler Town and Country into a pickup

admin — Sat, 28 Sep 2024 20:10:38 +0000

What I am working on today 09-28-24. A Chrysler mini van turned into a pickup truck. #Chrysler #pickuptruck #3dbuild #3dmodeling

This is a model build I am doing right now. I started with the platform of the Chrysler Mini Van as a base to get the wheelbase right and the width (For another project), but I got caught up in it and after I built the sides I started deleting and folding to produce the truck. Still working on it…

Home: https://www.pcgeos.com